Dimensions Guide
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
Single-Handle Posi-Temp®
Pressure Balancing
Shower Trim Only
(less Showerhead)
FAUCET DESCRIPTION
• Metal and brass construction with Chrome plated or Classic Brushed Nickel (CBN) finish
• Shower arm has 1/2" IPS male threads
• Supplied with vandal resistant screws
OPERATION
• Lever style handle with temperature indicators on the escutcheon
• Handle operates counterclockwise through a 270° arc with off at 6 o'clock, and maximum hot at the
9 o'clock position. Shut off in clockwise direction
• Adjustable temperature limit stop to restrict the handle travel in the HOT direction
• Pressure balancing mechanism maintains selected discharge
temperature to ± 2°
FLOW
• Pair with a Vandal-Resistant Showerhead:
5263 (2.5 gpm/9.5 L/min) - Chrome finish
5263CBN (2.5 gpm/9.5 L/min) - Classic Brushed Nickel finish
5263EP17 (1.75 gpm/6.6 L/min) - Chrome finish, WaterSense® certified
5263EP17CBN (1.75 gpm/6.6 L/min) - Classic Brushed Nickel finish, WaterSense® certified
5263EP15 (1.5 gpm/5.7 L/min) - Chrome finish, WaterSense® certified
5263EP15CBN (1.5 gpm/5.7 L/min) - Classic Brushed Nickel finish, WaterSense® certified
CARTRIDGE
• Pair with a brass Posi-Temp rough-in valve:
• 8370HD*: 1/2" CC connection without integral stops
• 8371HD*: 1/2" CC connection with integral stops
• 8372HD*: 1/2" IPS connection with integral stops
• 8373HD*: 1/2" PEX connection with integral stops
• 8374HD*: 1/2" CPVC connection with integral stops
• 8375HD*: 1/2" UPONOR connection with integral stops
*Includes the 1222HD Brass Posi-Temp Cartridge
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to: WaterSense® (only applies to 1.5 and 1.75 gpm for above mentioned 5263
series showerheads), ASME A112.18.1/CSA B-125.1 and all applicable requirements referenced
therein including NSF61/9
•
ADA for lever handle
WARRANTY
• Warranted for 5 years against material or manufacturing defects
FLOOR LINE
FINISHED
WALL LINE
ESCUTCHEON
HANDLE
DIRECTION
OF HANDLE
ROTATION
L
6-3/4"
(152mm)
C
45"-48"
(1143mm-1219mm)
3" (76mm)
MIN. WALL
CAVITY
6'-6"
(1981mm)
NOMINAL
13/16" (21mm)
SEE NOTE BELOW
7" (178mm)
ESC. DIAM.
4-1/2” (114mm)
PLASTER GUARD
OPENING
2-1/2" MAX.
(63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
Rev. 11 /12
C O M M E R C I A L
Models: T8375NH,
T8375NHCBN