Specification

ManualsBrandsMOEN ManualsKitchenChateau 1-Handle Posi-Temp Shower Faucet Trim Kit in Chrome (Valve Not Included)

CRITICAL DIMENSIONS

(DO NOT SCALE)

CHATEAU

POSI-TEMP

Single-Handle Tub/Shower Trim Kit

Models: TL181 series - valve trim only

(Bulk Packed 12 per carton)

TL182 series - shower trim only

(Bulk Packed 12 per carton)

TL183 series - tub/shower trim

(Bulk Packed 12 per carton)

Valves: 62300 series

2500 series

6.5" (165mm)

ESC. DIAM.

FINISHED WALL LINE

FACE OF STUD

DIRECTION

OF HANDLE

ROTATION

4-1/2" (114mm)

WALL OPENING

2"CC (51mm)

1 7/8" IPS (48mm)

MAX WALL

2 1/2" MAX. (63mm)

1/2" MIN. CC (13mm)

5/8" MIN. IPS (16mm)

1-3/8" (35mm)

1 3/8"

(35mm)

3/16"(typ) (5mm)

1 1/2" MAX.

(38mm)

PLASTER GROUND

3-1/2" (89mm) MAX.

2-1/4" (57mm) MIN.

DIAMETER

WALL

OPENING

PLASTIC

TUB/SHOWER

SURROUND

FLOOR LINE

SHOWER

45" (1143mm)/

48" (1219mm)

32" (813mm)

TUB/SHOWER

AND TUB ONLY

6'-6"

(1981mm)

NOMINAL

FLOOR LINE

5-1/4"

(133mm)

7-1/2"

(190mm)

TUB RIM

2-5/8"

(67mm)

Specifications

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

DESCRIPTION

• Metal construction with various finishes identified by suffix

• Includes non-metalic showerhead, arm, flange and non-metalic

diverter tub spout

OPERATION

• Handle operates counterclockwise through a 270° arc with off

at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in

clockwise direction

• Adjustable temperature limit stop to control maximum hot water

temperature

• Pressure balancing mechanism maintains selected discharge

temperature to ± 3°

FLOW

• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi

• EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi

• NH suffix models contain no showerhead

CARTRIDGE

• 1222 cartridge design

• Accommodates back to back installations

• Nonmetallic/nonferrous and stainless steel material

STANDARDS

• Third party certified to meet ASME A112.18.1/CSA B125.1 and all

applicable requirements referenced therein

• EP suffix models are third party certified to WaterSense®

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

TL183sp: Rev. 5/13

THIN WALL APPLICATIONTHICK WALL APPLICATION

There is more than 1 version of this model.

Page down to identify the version you have.

EP Suffix

Models Only

Summary of content (2 pages)

PAGE 1
Speci fic at ions There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • Metal construction with various finishes identified by suffix Includes non-metalic showerhead, arm, flange and non-metalic diverter tub spout OPERATION • • • Handle operates counterclockwise through a 270° arc with off at 6 o’clock and maximum hot at the 9 o’clock position.
PAGE 2
Speci fic at ions DESCRIPTION • • Metal construction with various finishes identified by suffix Includes non-metalic showerhead, arm, flange and non-metalic diverter tub spout OPERATION • • • Handle operates counterclockwise through a 270° arc with off at 6 o’clock and maximum hot at the 9 o’clock position.