Dimensions Guide

FINISHED
WALL LINE
FACE OF STUD
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
TUB RIM
6'-6"
(1981mm)
L
C
1-3/8" (35mm)
2-1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
10"
(254 mm)
2-1/2"
(64mm)
7" (178mm)
ESCUTCHEON
DIAMETER
7-1/8"
(181mm)
18-7/8"
(479mm)
ARRIS™
Single-Handle Posi-Temp® Tub/Shower
Trim Kit
Models: TS22001 series - valve trim only
TS22002 series - shower trim only
TS22003 series - tub/shower trim
Valves: 62300 series, 2500 series
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes 10" rainshower showerhead, arm, flange and diverter tub spout
OPERATION
• Handle operates counterclockwise through a 270° arc with off at
6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to± 3°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
• EP suffix models are limited to 2.0 gpm (7.6 L/min) at 80 psi
• NH suffix models contain no showerhead
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to: ASME A112.18./CSA B125.1 and all applicable
requirements referenced therein
• EP suffix models are IAPMO Green listed and third party certified to
WaterSense®
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
4/13
EP Suffix Models Only
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
M•pact™ System