Specification Sheet

Valve Sold Separately
TS3116sp: Rev. 11/07
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
WATERHILL™
ExactTemp® 3/4" Thermostatic
Tub/Shower Trim
Models: TS3110 series-valve trim only
TS3112 series-shower trim only
TS3116 series-tub/shower trim
Valves: S936 - thermostatic
S956 - volume control
8" (203mm)
6" (152mm) MIN.
WALL OPENING
WALL OPENING
8-7/16"
(214mm)
2-1/4"
(57mm)
6-11/16"
(169mm)
4-9/16"
(116mm)
5-1/4"
(133mm)
2-11/16"
(68mm)
3-3/8"
(86mm)
10"
(254mm)
5-1/4"
(133.4mm)
WALL OPENING
2-1/4"
(57mm)
WALL OPENING
8" (203mm)
6"(152mm) MIN
2-11/16"
(68.4mm)
8-7/16"
(214.3mm)
10"
(254mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• For use with S936 3/4” thermostatic valve and S956 volume control valve
with integral checkstops
OPERATION
• Flow lever operates counterclockwise through a 90 degree arc with off at
6 o’clock and maximum flow at the 3 o’clock position. Shut off in clockwise
direction
• Temperature lever operates through a 340 degree arc with maximum cold at
full clockwise rotation and maximum hot at full counterclockwise rotation
• Safety stop preset temperature at 105˚F ( 41degrees C)
• Safety stop override allows maximum temperature at 120˚F (49˚C)
• Factory established temperature range from 70˚F (21˚C) to 120˚F (49˚C)
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 130156 thermostatic cartridge design with non metallic/nonferrous materials
• 130157 volume ceramic disc cartridge design
STANDARDS
• Third party certified to meet CSA B-125, ASME A112.18.1M and all applicable
requirements referenced therein including ASSE1016
• for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installation
CRITICAL DIMENSIONS
(DO NOT SCALE)
ADA
SHOWER ONLY APPLICATION
TUB/SHOWER APPLICATION