Specification

ManualsBrandsMOEN ManualsBath90 Degree Moentrol Shower Only in Chrome (Valve Not Included)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

Rev. 1/11

2" CC (51mm)

1-7/8" IPS (48mm)

MAX WALL

HOT

INLET

COLD

INLET

FINISHED WALL LINE

FACE OF STUD

4-1/2" (114mm)

WALL OPENING

FLOOR

45" (1143mm)/

48" (1219mm)-SHOWER

32" (813mm)-TUB OR

TUB SHOWER

7-1/2"

(191mm)

MIN

TUB RIM

6'-6"

(1981mm)

1-3/4" (44mm)

2-1/2" MAX. (63mm)

1/2" MIN. CC (13mm)

5/8" MIN. IPS (16mm)

FLOOR

1-3/4"

(44mm)

1-1/2"

(38mm)

3/16" (typ) (5mm)

PLASTER GROUND

3-1/2" (89mm) MAX.

2-1/4" (57mm) MIN.

DIAMETER

WALL

OPENING

PLASTIC

TUB/SHOWER

SURROUND

6-3/16”

(157mm)

2-1/2”

(64mm)

6-7/16”

(164mm)

2-7/16”

(62mm)

7-1/4”

(185mm)

8-3/8”

(213mm)

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• Includes showerhead, arm, flange and diverter spout

OPERATION

• Lever style handle with temperature indicator on the escutcheon,

pull-on/push-off operation

• Temperature operates through an 180° arc of handle travel

(full cold to full hot)

• Adjustable temperature limit stop to control maximum hot water

temperature

• Pressure balancing mechanism maintains selected discharge

temperature to ± 3.6˚F (±2˚C)

FLOW

• Showerhead limited to 2.5 gpm (9.5 L/min) at 80 psi

CARTRIDGE

• 1225® cartridge design

• Nonmetallic/nonferrous and stainless steel materials

• Accommodates back to back installations

STANDARDS

• Third party certified to ASME A112.18.1/CSA B-125.1,

ASSE 1016 and all applicable requirements referenced therein

•

ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

90 DEGREE™ MOENTROL

Single-Handle Tub/Shower Trim Only

Model:

TS3711 series - valve trim only

TS3715 series - shower trim only

TS3713 series - tub/shower trim only

Valves: 63100, 3500 series

THIN

WALL APPLICATION

THICK WALL APPLICATION

Summary of content (1 pages)

PAGE 1
Specifications FAUCET DESCRIPTION • • Metal construction with various finishes identified by suffix Includes showerhead, arm, flange and diverter spout OPERATION • • • • Lever style handle with temperature indicator on the escutcheon, pull-on/push-off operation Temperature operates through an 180° arc of handle travel (full cold to full hot) Adjustable temperature limit stop to control maximum hot water temperature Pressure balancing mechanism maintains selected discharge temperature to ± 3.