Specification
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c i f i c a t i o n s
Rev. 3/14
8" (203mm)
Min.
3"
(76mm)
3-5/16"
(84mm)
7"
(178mm)
Cold Inlet Hot Inlet
Escutcheon Dia.
2-1/8” (54mm)
3” (76mm) MIN.
MAX WALL THICKNESS
1-3/4” (45mm)
7.21380"
(183mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Designed to be installed through 2, 1-1/4” min. dia. and 1,
1” min. dia holes, 8" on center
• Adjustable for non-8” centers
• Optional hot and cold temperature indicators available
OPERATION
• Lever handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side handle counterclockwise to open and clockwise to close
• Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
• Aerator is limited to 1.5 gpm max. (4.0 L/min)
CARTRIDGE
• 1224 cartridge design with nonmetallic/nonferrous and stainless steel
materials
STANDARDS
• Third party certified to CSA B125.1, ASME A112.18.1, ICC A117.1 and all
applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
• Third party certified to meet EPA criteria for water efficiency and
performance
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
FINA™
Two-Handle Wall Mount Faucet Trim
Model: TS41706 Series
Valve: 9400
M•pact™ System