Dimensions Guide

WEYMOUTH™
Two Handle Bidet with Metal Waste
Assembly
Models: TS42105 series
Valve: 9200
NOTE: Minimum Diameter Holes for Installation
Diverter Valve - 1” (25mm)
Handle Valves - 1-1/8” (29mm)
Spray Nozzle - 5/8” (16mm)
Lift Rod Escutcheon - 1/2” (13mm)
1-1/4" (32mm) MAX.
DECK THICKNESS
3" (76mm) MIN.
6" (152mm) MIN.
16" (406mm) MAX.
4"
(101mm)
5-1/8"
(130mm)
2-1/2"
(64mm)
CRITICAL
LEVEL
DIVERTING
MECHANISM
3"
(77mm)
HANDLE
ESCUTCHEON
2” (51mm)
DIAMETER
2"
(51mm)
COLD
INLET
HOT
INLET
FLEXIBLE
CONNECTORS
LIFT ROD
SPRAY
NOZZLE
7/8"
(22mm)
MAX.
3/8" DIA.
SUPPLY
TUBE
2-1/8"
(53mm)
4/11
NOTE: The 9200 valve can not be used with
Non Rim Flush Bidet Fixtures
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Installed on 6" (152mm) to 16" (406mm) centers
• 1/2" IPS connections will accept standard ball nose connection
for 3/8" tubing
• Diverter valve includes an integral vacuum breaker
• Includes metal pop-up type waste assembly
OPERATION
• Lever style handles, 180˚ rotation
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Water flow is diverted by turning the knob counterclockwise for fill
and clockwise for rosetta spray
CARTRIDGE
• 94831 diverter cartridge
• 1224 cartridge design for hot and cold valves
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to CSA B125.1, ASME A112.18.1 and all
applicable requirements referenced therein
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com