Dimensions Guide

WEYMOUTH™
Two-Handle Widespread Lavatory Faucet
Models: TS42114 series (cross handle)
TS42108 series (lever handle)
Valves: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3 HOLES, 1-1/8" MIN. DIA.
3”
(76mm)
4”
(101mm)
4”
(101mm)
Quick
Connect
Hose
Assembly
8” (203mm) - 16” (406mm)
CENTERS
COLD
INLET
HOT
INLET
2-1/2”
(64mm)
2”
(51mm)
1-1/4” (32mm)
MAX. DECK THICKNESS
5-3/4”
(146mm)
7-1/2”
(190mm)
5-1/4”
(133mm)
1-1/2”
(38mm)
Rev. 4/11
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up waste assembly
OPERATION
• Cross and lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense® CSA B-125.1, ASME A112.18.1 and
all applicable requirements ref er enced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal
Safe Drinking Water Act
•
ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com