Specs Sheet
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" copper connections
• Designed to be installed through 2, 1-1/4" and 1, 1" min. dia. holes,
8" on center
• Adaptable for non-8" centers
OPERATION
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side counterclockwise to open and clockwise to close
• Rotate cold side clockwise to open and counterclockwise to close
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1, NSF 61/9, and all
applicable requirements referenced therein
• Third party certified to comply with WaterSense® High Efficiency
Bathroom Sink Faucet Specification
• Contains no more than 0.25% weighted average lead contents
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
Icon™
Two-Handle Wall Mount Faucet
Models: TS6530 series
3"
(76mm)
4-3/16"
(106mm)
7-1/2"
25˚
(191mm)
7.19"
(182mm)
Escutcheon Dia.
2-1/4" (57mm)
MAX WALL THICKNESS
1-3/4” (45mm)
1-7/8"
(48mm)
3" min.
(76mm)
Recommended
Rev. 3/14
M•pact™ System