Specification

5/8” OD
(16mm)
5" (127 mm) MIN.-15" (381 mm) MAX.
7-1/4"
( 184 mm )
7-5/16"
(186 mm )
2-3/4"
( 70 mm )
1-13/16"
( 46 mm )
4-3/8"
( 111 mm )
3" ( 76 mm ) MAX
ROUGH - IN DECK
THICKNESS
1-1/2"
(38 mm )
15 / 16"
( 24 mm )
DATA CABLE ( 30 ' ) ( 9.2 m )
2-5/8”
(67mm)
3-1/8”
(79mm)
2-3/4”
(70mm)
9”
(229mm)
4-3/4”
(121mm)
4-1/4”
(108mm)
7-5/8”
(194mm)
7-13/16”
(199mm)
MOUNT SPOUT SHANK THRU
1 - 1 / 2" ( 38 mm ) HOLE
MOUNT
HANDSHOWER
THRU 1-3/8"
(35mm) HOLE
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
DESCRIPTION
Metal construction with various finishes identified by suffix
Use with io Digital valve S4994 and spout shank 4898
Single function handshower with double check valves
OPERATION
Digital Thermostatic control
Digital control dial controls temperature with LED indicators
Digital control dial controls the flow rate with LED indicators
Digital on/off button
Digital safety lock
3 digital presets for custom water level and temperature control
Hot top off (optional remote required for this function)
Temperature range adjustment from 60 degrees F to 120 degrees F
(16 degrees C to 49 degrees C). Factory maximum setting is 115 degrees
(46 degrees C)
Remote (optional) uses RF technology and has a 30’ (9.2m) range
depending on intermediary structures
FLOW
Hand shower meets 2.0 gpm max (7.6 L/min) @ 80psi
STANDARDS
Third party certified to meet ASME A112.18.1/CSA B-125.1, CSA B125.3,
ASSE1070 and all applicable requirements referenced therein
Digital controller third party certified to meet UL1951
Digital controller and Remote control third party certified to meet FCC
part 15
WARRANTY
Lifetime limited warranty against finish defects to the original consumer
purchaser. 5 year warranty against finish defects in commercial
installations
5 year warranty against leaks, drips and operation defects to the original
consumer purchaser
1 year warranty against leaks, drips and operation defects if used in
commercial installations
ioDIGITAL™ 90 DEGREE™
Digital Roman Tub Trim Only with
Handshower
Models: TS9041 series
Valve: S4994 (Sold separately)
Spout Shank: 4898 (Sold separately)
Optional Remote: SA349 series
(Sold separately)
Controller: TS3495 series (Sold separately)
NOTE: THE INSTALLATION SHOWN IS FOR TILE DECKS, THIS VALVE WILL ALSO FIT STEEL, CAST IRON OR PLASTIC DECKS
Rev. 8/14

Summary of content (1 pages)