Specification

ManualsBrandsMOEN ManualsBathBanbury 4 in. Centerset 2-Handle Bathroom Faucet in Spot Resist Brushed Nickel

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Spec i fi ca tions

BANBURY®

Two-Handle 4” Centerset Lavatory Faucet

Models: WS84913 series includes

pop-up waste

3-5/8"

(92mm)

9-1/4"

(235mm)

4-1/8"

(105mm)

4-3/4"

(121mm)

2-1/2" (64mm)

Min. to backsplash

recommended for lift

rod operation

(178mm)

Escut.

2-1/2"

(64mm)

Deck Gasket

2-5/8"

(67mm)

5/16" (8mm) MIN. Deck Thickness

1-3/16" (30mm) MAX. Deck Thickness

(102mm)

Escut.

6-1/2"

(165mm)

Deck Gasket

6-5/8"

(168mm)

Rev. 7/17

DESCRIPTION

• Metal construction with various finishes identified by suffix

• 1/2" IPS connections for flexible hoses only; not for use with rigid or semi-

rigid supply risers (3/8" Copper or Pex) with coupling nuts

• Installation through 3 holes, 1" min. diameter, and 4" on center

• Includes pop-up waste assembly

OPERATION

• Lever style handles

• Maximum handle rotation angle is 90° to full on

• Hot side counterclockwise to open (clockwise to close)

• Cold side clockwise to open (counter-clockwise to close)

• Rotating spout

FLOW

• Water usage is limited to these maximum flow rates as indicated by the

corresponding product markings

1.2 gpm max (4.5L/min) at 60 psi

CARTRIDGE

• 1224 cartridge design

• Nonmetallic and stainless steel material

STANDARDS

• Third party certied at WaterSense®, ASME A112.18.1/CSA B125.1, and all

applicable requirements referenced therein including NSF 61/9 & 372

• Products marked with 1.2 gpm are compliant with California water

efficiency regulations

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA

for lever handles

WARRANTY

• Limited lifetime warranty against leaks, drips and nish defects to the

original homeowner

• 10 year warranty when used in a multifamily installation

• 5 year warranty when used in a commercial installation

Visit www.moen.com/support for complete details and limitations

OPTIONS (See Illustrated Parts page)

• Thin and thick deck mounting hardware kits available

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
S p e cif ic at i o n s There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • • • Metal construction with various finishes identified by suffix 1/2" IPS connections for flexible hoses only; not for use with rigid or semirigid supply risers (3/8" Copper or Pex) with coupling nuts Installation through 3 holes, 1" min.
PAGE 2
S p e cif ic at i o n s DESCRIPTION • • • Metal construction with various finishes identified by suffix 1/2" IPS connections will accept standard ball nose connection for 3/8" tubing Includes pop-up type waste assembly • • • Lever style handles Hot side counterclockwise to open (clockwise to close) Cold side clockwise to open (counter-clockwise to close) • Water usage is limited to these maximum flow rates as indicated by the corresponding product markings ° 1.2 gpm max (4.