Full Product Manual

Towel Bar
is
constructed of zinc.
q
Y2603BN
–
Robe Hook
Brushed Nickel Finish
q Y2603CH – Robe Hook
Chrome Finish
Cleaning Instructions:
25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.SHOWHOUSE.MOEN.COM
Copyright Creative Specialties International Literature #BA1440
1. Position the mounting template on the wall in the desired location.
2. Remove the mounting post from the body by loosening the setscrew.
3. Place the mounting post on the template.
4. Drill a 1/4" hole at the center of the oval marked location.
5. Remove the template from the wall and insert the wall anchor
(provided) into the drilled hole.
6. Place the mounting plate on the wall over the installed wall anchor.
Insert screw through the mounting plate into the anchor. Tighten the
screw.
7. Position robe hook with the setscrew down, and place over mounting
post. Tighten the setscrew.
Stock Number:
______________________
Robe Hook
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Robe Hook
Y2603
Banbury™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.