Specification

 Y3518BN – 18 in. Towel Bar

Brushed Nickel Finish

 Y3524BN – 24 in. Towel Bar

Brushed Nickel Finish

25300 AL MO E N D R I VE  NO RTH O L M S TE D, OH 4 4 0 70

CO R P O RAT E HE A D Q U A RT ER S : (8 0 0 ) 32 1 -8 8 0 9  F A X: ( 8 0 0 ) 8 48 -6 6 3 6

IN T E R NAT IO N A L : (440 ) 9 6 2 - 2 0 00  F A X: ( 4 4 0 ) 962 -2726

CU S T O M ER S ER V ICE ( US A): 800 -882 - 0 1 1 6  FA X: (88 8 ) 3 7 9 - 2720

W WW . MO E N .C O M

Towel Bar is constructed of zinc.

Cleaning Instructions:

Stock Number: Y3518 18 in. Towel Bar

Y3524 24 in. Towel Bar

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

18in and 24 in. Towel Bar

Y3518/Y3524

Hensley

™

Technical Specification

To preserve the fine finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.

1) Position the mounting template on the wall in the desired location.

2) Using a level, align the template and tape it to the wall.

3) Drill two ¼” holes at each mounting post location that corresponds to

your product. (We recommend using the horizontal holes for drywall

installation).

4) Remove the template from the wall.

5) Lightly tap anchors until flush with the wall.

6) Remove mounting posts from the product assemblies by loosening each

setscrew.

7) One at a time, place each mounting post over anchors (notch facing

downward) and insert screws through post into anchors.

8) Tighten screws.

PAGE 1
Hensley™ Technical Specification 18in and 24 in. Towel Bar Stock Numbers:  Y3518BN – 18 in. Towel Bar Brushed Nickel Finish  Y3524BN – 24 in. Towel Bar Brushed Nickel Finish Y3518/Y3524 Dimensions: Installation Instructions: Materials: Towel Bar is constructed of zinc. 1) Position the mounting template on the wall in the desired location. 2) Using a level, align the template and tape it to the wall. 3) Drill two ¼” holes at each mounting post location that corresponds to your product.