Specification Sheet

Colinet™ Accessories Technical Specication
Tank Lever YB0501
Stock Numbers:
Materials:
YB0501CH – Tank Lever
Chrome
YB0501BN – Tank Lever
Brushed Nickel
YB0501BL – Tank Lever
Matte Black
YB0501BG – Tank Lever
Brushed Gold
Installation Instructions:
1. Remove existing tank lever.
2. Remove the arm mechanism from the new tank lever by loosening nut.
3. Unscrew the tank nut. The thread for the tank nut is a left handed thread.
4. Position the new tank lever through the tank hole. The tank lever
handle should be pointing away from the toilet bowl.
5. Tighten nut. Depending on the curvature of the tank, there might be a
slight gap between the outside of the tank and the base of the lever.
6. Place the arm mechanism on the tank lever post. Adjust the arm up
or down as needed. Tighten nut to secure the arm in place.
7. Adjust the arm mechanism from side to side as needed. Make sure
the arm does not come into contact with the tank wall or the flush
mechanism. Tighten screw to lock the arm in place.
8. Attach the flapper valve chain to one of the provided slots on the arm.
Be sure to eliminate any slack in the chain.
9. Make sure no water is leaking through the flapper when the handle is
in its normal position (not flushing).
Tank Lever is constructed of zinc.
The arm mechanism is constructed of
plastic.
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©Copyright Moen Incorporated
Stock Number: _______________________ Tank Lever
By Moen Incorporated
Dimensions:
3-1/2"
(89mm)
1-5/16"
(34mm)
4"
(103mm)
2-3/4"
(70mm)
10"
(254mm)
Cleaning Instructions:
To preserve the ne nish of this product, clean only with a soft damp
cloth. Dry well. Do not use commercial or abrasive cleaners.
3-1/2"
(89mm)
1-5/16"
(34mm)
4"
(103mm)
2-3/4"
(70mm)
10"
(254mm)