Full Product Manual

Robe Hooks are constructed of zinc.
 YB5103BN – Double Robe
Hook
Brushed Nickel Finish
 YB5103CH – Double Robe
Hook
Chrome Finish
 YB5103ORB – Double Robe
Hook
Oil Rubbed Bronze Finish
Cleaning Instructions:
25300 AL MOEN DR I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: [phone]  F AX: [phone]
I NTER NATI ON AL: (440) 962 -2000  F AX: [phone]
C USTOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
W WW . MOEN . COM
Copyright Creative Specialties International Literature #BA1617
1. Remove the mounting bracket from the body by loosening the
setscrew.
2. Position the assembled unit on the wall where desired.
3. Lightly mark the outline of the base.
4. Center a mounting bracket within the base outline with “UP” facing
you.
5. Attach the mounting bracket to the wall, using the wall anchors
provided.
6. Mount the base on the corresponding mounting bracket. Check and
make sure that the base screw hole is facing down. Assemble a set
screw to the base. Use the allen wrench included in a hardware kit to
tighten the set screw and secure the assembly to the mounting
bracket.
Stock Number:______________________Robe Hook
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Double Robe Hook
YB5103
Voss™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.