Installation Guide

 YB5218CH – 18” Towel Bar

Chrome Finish

 YB5218BN – 18” Towel Bar

Brushed Nickel Finish

25300 AL MO E N D R I VE  NO RTH O L M S TE D, OH 4 4 0 70

CO R P O RAT E HE A D Q U A RT ER S : ( 8 00 ) 3 2 1 -88 0 9  FA X: (800) 8 4 8 - 6 6 3 6

IN T E R NAT IO N A L : (440 ) 9 6 2 - 2 0 00  F A X: ( 4 4 0 ) 962 -2726

CU S T O M ER S ER V ICE ( US A): 800 -882 - 0 1 1 6  FA X: ( 88 8 ) 3 7 9 - 2720

W WW . MO E N .C O M

18” Towel Bar is constructed of zinc.

Cleaning Instructions:

Stock Number: YB5218 18” Towel Bar

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

18” Towel Bar

YB5218

Wynford

Technical Specification

To preserve the fine finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.

1) Position the mounting template on the wall in the desired location.

2) Using a level, align the template and tape it to the wall.

3) Drill two ¼” holes at each mounting post location that corresponds to

your product.

4) Remove the template from the wall.

5) Lightly tap anchors until flush with the wall.

6) Remove mounting posts from the product assemblies by loosening each

setscrew.

7) One at a time, Place each mounting post over anchors (notch facing

downward and insert screws through post into anchors.

8) Tighten screws,

PAGE 1
Wynford® Technical Specification 18” Towel Bar Stock Numbers:  YB5218CH – 18” Towel Bar Chrome Finish  YB5218BN – 18” Towel Bar Brushed Nickel Finish YB5218 Dimensions: Installation Instructions: Materials: 18” Towel Bar is constructed of zinc. 1) Position the mounting template on the wall in the desired location. 2) Using a level, align the template and tape it to the wall. 3) Drill two ¼” holes at each mounting post location that corresponds to your product. 4) Remove the template from the wall.