Specification

Wynford
™
Technical Specication
YB5275
Corner Shower Basket
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Installation Instructions:
☐ YB5275CH – Corner Shower Basket
Chrome Finish
☐ YB5275BN – Corner Shower Basket
Brushed Nickel Finish
☐ YB5275ORB – Corner Shower Basket
Oil Rubbed Bronze Finish
Corner Shower Basket are constructed of
304 stainless steel.
Stock Number: Corner Shower Basket
By MOEN
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): [phone] • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen, Inc.
1. We strongly encourage you to determine if plumbing, electrical or other obstructions are
contained behind the wall surface prior to drilling.
2. Place the partially assembled basket against the desired installation corner of the shower.
Use the basket mounting brackets as a Template to mark the drill holes on the wall. Use a
level to ensure the basket is level. With a pencil, mark two Mounting locations on each of
the two shower basket mounting brackets.
3. Use a ¼” size Drill bit to drill holes at each marked mounting location.
4.Pushplasticanchorintoholes.Lightlytapanchorssothattheyareushagainstwalls.
5. Using the Allen Wrench, remove mounting brackets by removing screws. One at a time,
place mounting brackets on the anchors and install screws. Install covers and plastic
bushings by placing them over mounting bracket.
6. Align Basket holes with the holes in the decorative cover. Hand tighten screws to each side.
Further tighten using an Allen Wrench.
7. Snap decorative caps over the heads of the screws.
Topreservethenenishofthisproduct,cleanonlywithasoft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
8-7/64"
206mm
2-1/8"
54mm
2-5/64"
53mm