Use and Care Guide

Paper Holder is constructed of zinc.
q
YB5408CH
–
Paper Holder
Chrome Finish
q YB5408CP – Paper Holder
Chrome & Polished Brass Finish
q YB5408PB – Paper Holder
Polished Brass Finish
q YB5408WR – Paper Holder
Wrought Iron Finish
q YB5408BN – Paper Holder
Brushed Nickel Finish
q YB5408AN – Paper Holder
Antique Nickel Finish
q YB5408ORB – Paper Holder
Oil Rubbed Bronze Finish
Clea
ning Instructions:
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 [phone] •
FAX: [phone] • INTERNATIONAL: [phone] •
FAX: (440) 962
-
2726 CUSTOMER SERVICE (USA): 800
-
882
-
0116
1.
Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.
3. Place each mounting post on the template.
4. One at a time, place each anchor screw through the mounting plate,
centered in the large hole. Using a Phillips screwdriver, turn the
anchor screw while applying pressure. Screw will self drill and tap
into drywall.
5. Only insert screw ½ to ¾ into wall.
6. After all screws are installed, tear the template away from the wall.
7. Tighten all 4 the screws. Do not over tighten.
8. Place each post over the mounting plate (setscrew down). Pivoting
post with bar
to be on left side. Tighten both setscrews.
Stock Number:
______________________Paper Holder
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Paper Holder
YB5408
Kingsley Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Copyright CSI Bath Furnishing Division of Moen 02/22/01
Literature #BA1118