User Manual

20.252"
(514.40mm)
18"
(457.20mm)
Icon™ Technical Specication
YB5890
Glass Shelf
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
☐ YB5890BB – Glass Shelf
Brushed Bronze Finish
☐ YB5890BN – Glass Shelf
Brushed Nickel Finish
☐ YB5890CH – Glass Shelf
Chrome Finish
Glass Shelf posts and rail are constructed
of zinc. Shelf is tempered glass.
Stock Number: Towel Bars
By MOEN
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): [phone] • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen, Inc.
To preserve the ne nish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
This product features the Pro+Fit Installation Mounting System. If you do not
have the Pro+Fit Installation Template please use the following instructions.
(Note: only one hole is required per mounting post.)
1. Find the appropriate center to center measurement for the product you
are installing.
2. Mark that distance on the wall where you want to install the product.
3. Use a level to ensure that the pilot holes will be perfectly level.
4. Using ¼” drill bit, drill one pilot hole for each post.
5. Position mounting post to wall by inserting wall anchor into pilot hole and
pressing rmly.
6. Make sure that locking tab on mounting post is facing down (6 o’clock).
7. Tighten wall anchor screw while holding mounting post rmly in place.
DO NOT over tighten (6 – 8 full turns will secure the anchor).
8. Shelf must be attached to mounting posts as a unit-insert shelf into each post.
9. Attach posts by pressing rmly to mounting posts until it clicks. (The
square opening at the base of the post must be facing down to match-up
with locking tab.)
If you are mounting any parts into a hard surface snap o the anti-rotation ns
on the back of the mounting posts.
20"
(508mm)
5.581"
(141.76mm)
3.413"
(86.70mm)
2.252"
(57.20mm)
0.5"
(12.20mm)