Full Product Manual

Prime1
Towel Ring post is constructed of
zinc. Ring is aluminum.
 YB8086CH – Towel Ring
Chrome Finish
 YB8086OWB – Towel Ring
Old World Bronze Finish
 YB8086PB – Towel Ring
Polished Brass Finish
 YB8086BC – Towel Ring
Brushed Chrome Finish
 YB8086SN – Towel Ring
Satin Nickel Finish
25300 AL MOEN DR I VE  N OR TH OLMSTED, OH 44070
C ORPOR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: (800) 848 -6636
I N TERN ATION AL: (440) 962 -2000  F AX: [phone]
C U STOMER SER VI C E (U SA): 800-882-0116  F AX: [phone]
W W W . MOEN. C OM
Copyright Creative Specialties International Literature #BA1230
Cleaning Instructions:
1. Locate position where towel ring should be installed.
2. Using ¼” drill bit, drill one pilot hole.
3. Position mounting post to wall by inserting wall anchor into pilot hole
and pressing firmly.
4. Make sure that locking tab on mounting post is facing down (6
o’clock).
5. Tighten wall anchor screw while holding mounting post firmly in
place.
6. Attach towel ring by pressing firmly to mounting post until it clicks.
(The square opening at the base of the post must be facing down to
match-up with locking tab.)
7. Place spring roller into each post.
Stock Number:______________________Towel Ring
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
YB8086
Mason® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.