Installation Guide

Mason® Technical Specication
Double Paper Holder
YB8088
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
☐
YB8088CH - Double Paper Holder
Chrome Finish
☐
YB8088SN - Double Paper Holder
Satin Nickel Finish
Double Paper Holder is constructed
of zinc. Roller is plastic.
1. Position Pro-Fit Installation Mounting Template on wall in
desired location.
2. Using level align the template to the wall.
3. Using ¼” drill bit, drill one pilot hole for each post.
4. Position mounting post to wall by inserting wall anchor into pilot
 holeandpressingrmly.
5. Make sure that locking tab on mounting post is facing down
(6 o’clock).
6. Tightenwallanchorscrewwhileholdingmountingpostrmly
in place.
7. Attachpostbypressingrmlytomountingpostuntilitclicks.
(The square opening at the base of the post must be facing down
to match-up with locking tab.)
8. Place spring roller into each post.
Topreservethenenishofthisproduct,cleanonlywithasoft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Stock Number: YB8088 Double Paper Holder
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321 -8809 • FAX: [phone]
INTERNATIONAL: (440) 962 -2000 • FAX: [phone]
CUSTOMER SERVICE (USA) : 800 -882-0116 • FAX: [phone]
WWW.MOEN.COM
© 2014 Moen Incorporated. Moen is a registered trademark and Mason
is a trademark of Moen Incorporated. All rights reserved.
15.14
(384.45)
3.24
(82.20)
1.99
(50.60)
13.14
(333.85)
2.72
(69.20)