Use and Care Guide
25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: (800) 848- 6636
INTERNATIONAL: (440) 962- 2000 • FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720
WWW.SHOWHOUSE.MOEN.COM
Copyright Creative Specialties International 2006 Literature #BA1187
Towel Bars
posts
are
constructed of
zinc. Bar is aluminum.
q
YB98
18
CH
–
18” Towel Bar
Chrome Finish
q YB9824CH – 24” Towel Bar
Chrome Finish
q YB9818BN – 18” Towel Bar
Brushed Nickel Finish
q YB9824BN – 24” Towel Bar
Brushed Nickel Finish
q YB9818WR – 18” Towel Bar
Wrought Iron Finish
q YB9824WR – 24” Towel Bar
Wrought Iron Finish
Cleaning Instructions:
1.
Position the mounting template on the wall in the desired location. Using a
level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template with notch facing down.
4. One at a time, place each anchor screw through the mounting post, centered
in the hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.
5. Only insert screw ½ to ¾ into wall.
6. After all screws are installed, tear the template away from the wall.
7. Tighten all 4 screws. Do not over tighten.
8. Place skirt over each mounting post.Towel Bars
9. Assemble the Towel bar and posts.
10. While assembled, Position each end post with the setscrew down and place
over mounting post. Tighten the setscrew at the bottom of each base.
Stock Number:
______________________
Towel Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
18” & 24” Towel Bar
YB9818 & YB9824
Waterhill™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
18" 24"
Dim. A 18.00 24.00
Dim. B 20.40 26.40