MSDS

04/07/2014Revision:
04/13/2015Printed:
Page: 2
Mold Armor Mold Remover & Disinfectant
SAFETY DATA SHEET
11/10/2011Supersedes Revision:
CAS # Hazardous Components (Chemical Name)
3. COMPOSITION/INFORMATION ON INGREDIENTS
Concentration RTECS #
68424-85-1 Quaternary ammonium
compounds,benzyl-C12-16-alkyldimethyl,
chlorides
< 0.1 % UZ2995000
32426-11-2 1-Decanaminium, N,N-Dimethyl-N-octyl-, chloride
{Decyldimethyloctylammonium chloride}
< 0.1 % HD6520000
5538-94-3 1-Octanaminium, N,N-Dimethyl-N-octyl-, chloride < 0.1 % RG8250000
7173-51-5 1-Decanaminium, N-Decyl-N,N-dimethyl-, chloride < 0.1 % BP6560000
64-17-5 Ethyl alcohol {Ethanol} <200.0 PPM KQ6300000
4. FIRST AID MEASURES
Eyes:
Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact
lenses, if present, after the first 5 minutes, then continue rinsing eyes. If irritation
persists, get medical attention.
Skin:
Flush immediately with plenty of water. If irritation persists, get medical attention.
Inhalation:
If breathing is affected, remove to fresh air. Get medical attention.
Ingestion:
Immediately drink one cupful of water or milk. Get medical attention.
Aggravated Medical Conditions:
Persons with pre-existing skin disorders may be more susceptible to irritating effects
Emergency and First Aid
Procedures:
5. FIRE FIGHTING MEASURES
Flash Pt:
> 102.00 C Method Used: Cleveland Closed Cup
Firefighters should wear full protective clothing including self-contained breathing
apparatus. Cool fire exposed containers with spray.
Fire Fighting Instructions:
No data available.
Flammable Properties and
Hazards:
Autoignition Pt:
No data.
Explosive Limits:
LEL: No data. UEL: No data.
Use any agent appropriate for surrounding fire.
Suitable Extinguishing Media:
6. ACCIDENTAL RELEASE MEASURES
Emergency Action:
Isolate spill or leak area immediately. Keep unauthorized personnel away. Stay upwind.
Spill Cleanup:
Ventilate closed spaces before entering. Floor will be slippery. Do not touch or walk
through spilled material. Stop leak if you can do it without risk. A vapor suppressing foam
may be used to reduce vapors. Prevent entry into waterways, sewers, basements or
confined areas. Absorb or cover with dry earth, sand or other non-combustible material
and transfer to containers.
Large Spills:
Dike far ahead of liquid spill for later disposal.
Steps To Be Taken In Case
Material Is Released Or
Spilled:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format