Specification Sheet

Table Of Contents

EASY FIT, MORE COMFORT

The molded nose bridge with soft foam nose cushion

provides the wearer an easy comfortable fit. There’s

no metal noseband to adjust and the seal is maintained

without pressure points.

LAST LONGER, USE FEWER

The Dura-Mesh

shell, exclusive to Moldex

, protects the

filter media so it stays cleaner-looking longer. The shell

resists collapsing, even in heat and humidity so the

respirator holds its shape longer. The result is fewer

respirators used and lower costs.

APPLICATIONS

Hot, humid and dusty environments such as welding,

soldering and brazing, grinding, sanding, sweeping,

bagging, stone quarrying, metal machining, cement,

underground mining, polishing, buffing, lime, poultry

and textiles. No oils present.

FEATURES

• 100% PVC-Free.

• Available in three sizes to fit more workers and

increase OSHA compliance.

• Dura-Mesh

shell resists collapsing in heat and

humidity.

• Molded nose bridge seals easily without a metal

noseband.

•

Facepiece is naturally contoured without pressure

points.

•

Straps are securely attached so they don’t break at

the seal.

• Softspun

lining for increased comfort and durability.

• Soft foam nose cushion for added comfort.

• Meets heat and flame resistance in accordance with

ANSI/ISEA 110-2003 Section 7.11.1.

Ideas that wear well.

PAGE 1
EASY FIT, MORE COMFORT FEATURES The molded nose bridge with soft foam nose cushion provides the wearer an easy comfortable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points. • 100% PVC-Free. LAST LONGER, USE FEWER The Dura-Mesh® shell, exclusive to Moldex®, protects the filter media so it stays cleaner-looking longer. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer.
PAGE 2
USE AGAINST: Moldex-Metric, Inc. 1. Particulate aerosols free of oil. DO NOT USE AGAINST: 1. Concentrations of contaminants which are unknown, or are immediately dangerous to life or health. 2. Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower. 3. Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors. 4. Oil-based mists. RESTRICTIONS 1.