VIDA E+ DUAL MOUNTING KIT USER MANUAL
VIDA E+ DUAL MOUNTING KIT Specifications Material: aluminum Color: Matt black Weight: 128g Package Contents Front Fender hardware: (F-a) 2 x M5*21 bolts Rear Fender hardware: 1 x U stay (R-a) 2 x M5*8 bolts (R-b) 1 x M5 clip set (R-c) 1 x hanger part (h=30mm) (R-d) 2 x M5*21 bolts Warning - Read all information in this manual carefully before you start using the rack and fender set. Safety instructions are very important and should not be overlooked.
Installation 1. Ensure the bike is switched off with kickstand engaged and is on level ground. 2. Remove any accessories that may interfere with the installation and/or use of the rack and fender set 3. This Dual Mounting kit is the hardware set when you assemble the rack and fender set together. Front fender: 4. Both sides of front fork: Use a 4mm hex torque wrench to tighten two M5*21 bolts with 5-8Nm. Rear fender: 5.
Usage information - Check if the rack and fender set are firmly mounted before every ride. - Regulary check the state of the rack and fender set and mounting parts for any signs of looseness, deterioration, corrosion or other damage. LIMITED PRODUCT WARRANTY INFORMATION Giant Global Inc. warrants its products for a period of one (1) year from the date of purchase, this applies only for the original owner.
consequential loss or damage caused by negligence or default) arising from or concerning any Giant Global Inc. product. Giant Global Inc. makes no other warranties, express or implied. All implied warranties, including the warranties of merchantability and fitness for a particular purpose are limited in duration to that of the express warranties stated above. Any claim against this warranty must be made through an Authorized Giant Dealer or distributor.
Momentum and its symbol are trademarks of Giant Group. All rights reserved. / Momentum et son symbole sont des marques déposées de Giant Group. Tous droits réservés.