Instructions

8
English
Deutsch
Deutsch Seite
Français
Français Page
Italiano
Italiano Pagina
Español
Español Página
Nederlands
Nederlands Pagina
Polski
Polski Strona
4
5
6
7
8
9
10
SAM-300D
DIGITAL SUBWO OFER MODUL E
MONACOR INTERNATIONAL • ZUM FALSCH 36 • 28307 BREMEN • GERMANY
230 V~ / 50 H z /4 4 0 VA
T2.5AL
SAM-300 D
230 V~/ 50Hz
FUSE
AUTO
ON
OFF
POWER
HIGH LEVEL INPUT
RL
MAXMIN
200 Hz40 Hz
- 180 °0°
CUT OFF
PHASE
STANDBY/
POWER
LEVEL
LINE
IN
LINE
OUT
L/LFE R
1
2
3
Amplifier Insertion Module
forSubwoofers
These instructions are intended for non-pro-
fessionals with basic knowledge in DIY speaker
building. Please read the instructions carefully
prior to operation and keep them for later
reference.
1 POWER switch
2 Mains jack for connection to a socket
(230 V/ 50 Hz) via the mains cable provided
3 Support for the mains fuse
Always replace a blown fuse by one of the
same type.
4 Status LED
red = standby
green = power amplifier switched on
5 LEVEL control
6 CUT OFF control to set the cut-off frequency
for the subwoofer
7 PHASE control to shift the phase of the out-
put signal compared to the input signal
8 Input LINE IN (RCA jacks) for signals with line
level; when both jacks are connected (e. g.
stereo signal), the signals internally create a
sum signal (mono)
9 Output LINE OUT (RCA jacks) to route the
input signal e. g. to another amplifier
10 Screw terminals HIGH LEVEL INPUT as a sig-
nal input to connect the speaker outputs of
a power amplifier [instead of using the RCA
jacks LINE IN (8)]
1 Operating Elements
andConnections
English
English Page