Contents Page Introduction 2 Safety Instructions 3-4 Recycling (WEEE) 4 RoHS Statement 4 Foot Fixing 5 Amplifier Panel and Controls 6-8 Positioning & Set Up 9 Specification 10 Guarantee and Service 11 Claims under this guarantee 11 EC Declaration of Conformity 12 Data Protection 13 Owner Information 13 Warranty Card – Fold out section in back cover 1 © Monitor Audio 2006 BRW-10 Rev4
Introduction Thank you for your purchase of Monitor Audio Bronze BRW-10 subwoofer, which has been designed and constructed using quality systems and materials to provide years of enjoyment, reliability and pride of ownership. This product, as with all the Bronze BR range, is hand crafted from top to bottom using traditional woodworking skills for our sumptuous cabinets, married with the state of the art technology of our renowned drive units. Music is and should be a natural enhancement of life.
Safety Instructions 1. Read Instructions Please read and follow all of the instructions in this manual before enjoying your subwoofer. 2. Keep these instructions 3. Heed all warnings Any instructions preceded by this warning triangle MUST be followed. Failure to do so may cause personal injury or damage the unit/s. 4. Lifting/Moving Due to the weight of the BRW-10, care must be taken at all times when handling the product. 5.
11. Damage requiring Service Qualified personnel should service the appliance when: The power cord or plug has been damaged. Liquid has been spilt on the rear panel. The BRW-10 has been dropped or the enclosure damaged. The BRW-10 does not appear to operate normally or exhibits a marked change in its performance 12. Servicing The user should not attempt to service the appliance beyond that specified in this manual. Only qualified personnel should carry out all other servicing requirements. 13.
Foot Fixing The BRW-10 comes with rubber feet for fixing to the bottom of the cabinet. Also included are self taping screws to fix them to the bottom of the cabinet. These are very simple to attach, but please ensure care is taken at all times and the correct tools are used. BEWARE.
Amp Panel and Controls 1 2 3 4 5 6 7 9 10 8 10a 6 © Monitor Audio 2006 BRW-10 Rev4
1. Stand-by / On Indicator The LED indicates whether the unit is in stand-by mode or operational. 2. RCA Line Level Inputs (Left & Right) This is the only method of signal input connection to the BRW-10. When using a stereo amplifier system, connection can be provided by a pair of high-quality signal cables from the pre-out section of an amplifier.
6. Power Mode Switch with On-Auto-Off Facility The Power Mode Switch has three positions: ‘On’–‘Auto’–‘Off’. When the switch is in the ‘Off’ position the subwoofer will not function. In the ‘Auto’ position the subwoofer will automatically switch on when an input signal is received. It will remain on. If no signal is received for around 15-20 minutes, the BRW-10 will then switch into standby mode until a signal is received once more.
Positioning/Initial Set Up The BRW-10 should now be sited in the most suitable position, preferably not directly in the corner of a room as this may cause excessive bass boom. Once a desirable position is achieved it is important to check if the cables are long enough to reach comfortably without being under tension. Leave the BRW-10 unplugged until the installation procedure is completed. The optimal control settings will depend entirely on your system configuration.
Specification Low frequency limit:- 27Hz Upper frequency limit:- 40 – 120 Hz Variable Low pass filter alignment:- 4th order 24db/octave Amplifier Output:- 150 Watts (R.M.S) Amplifier classification:- Class- D Digital amplifier Driver compliment:- 1 x 10” MMP MK2 long throw driver Dimensions:- Millimetres:320 H x 320 W x 340 D Inches:12 5/8 x 12 5/8 x 13 3/8 All dimensions excluding grille Weight (unpacked) 12.5 Kg (27.
Guarantee and Service Valid upon completion of the incorporated warranty card and its return within 30 days of purchase. This equipment has been fully tested prior to dispatch from the factory. Both the craftsmanship and the performance of this product is guaranteed against manufacturing defects for the period of one year from the date of purchase (see conditions below), provided that the product was supplied by an authorised Monitor Audio retailer under the consumer sale agreement.
EC Declaration of Conformity EC Declaration of Conformity We, Monitor Audio Ltd. Unit 2,24 Brook Road Rayleigh Essex SS6 7XL England 06 Declare in own responsibility, that the BRW-10 product described in this manual is in compliance with Technical Standards/Council Directives: (LVD) 73/23/EEC Low Voltage Directive EN60065: 09.93+ A11:09.97 Safety requirements for mains operated electronic and related apparatus for household and similar use. (EMC) 89/336/EEC Electro Magnetic Compatibility EN55013: 08.
Data Protection We at Monitor Audio are committed to respecting the wishes and privacy of our customers. Any information you provide will be held in the strictest confidence and only used within the Monitor Audio organisation for the provision of services such as warranty claims or spare parts. We may wish to contact you in the future to ensure you are happy with the products and standards of service we provide and to keep you up-to-date with the latest products and promotions we have to offer.