Owner's Manual

Pre-Construction Bracket Installations Steps:

1. Decide location of speaker (s).

2. Clip xing wings into place in convenient location around the polymer frame to suit the joists.

NOTE: Ensure the clips of the wings are xed securely. There should be no gap around the outside of the wing where it joins the bracket. If

there is a gap, this is a sure sign one of the clips is not in correctly.

3. Staple xing wings to joists/ studs. Ensure the Monitor Audio and colour text on the wings face away from you when fastening.

4. Cable tie/ zip tie the speaker cable to the loop provided inside the moulding. Snap the loop o when installing speaker.

5. Fix plaster board/ dry wall.

6. Cut hole using INNER edges as cutting reference. DO NOT CUT TO THE OUTER EDGES OF THE BRACKET.

Alternative xing arrangements are possible: