Owner's Manual

ManualsBrandsMonitor Audio ManualsHome AudioCT180-T2

Table Of Contents

Installation Guide

PRODUCT & INSTALLATION

GUIDE

INSTALLATION GUIDE

Summary of content (8 pages)

PAGE 1
P R O D U C T & I N S TA L L AT I O N GUIDE I N S TA L L AT I O N G U I D E
PAGE 2
Custom Install Trimless Series Features All models feature our new ‘Trimless’ grilles, held in place by high strength Neodynium magnets covering the entire product for that true trimless, stealth look. All models also feature our unique Tri-Grip® ﬁxing design. This ‘dog’ style ﬁxing provides a greater contact surface area than other types in no less than 3 different areas on the single ﬁxing. The Tri-Grip ﬁxings are made from a tough re-enforced polymer, giving a secure ﬁxing.
PAGE 3
Prior to Fitting the Custom Install Series Speakers CAUTION: These Custom Install loudspeakers can only be ﬁxed into plasterboard (dry-lined) or suspended ceilings/ walls with a thickness of up to 45mm (1 3/4”). Solid wall installation will require channeling out and frame work constructed to provide a structure for the Tri Grip® dog legs to clamp to.
PAGE 4
Fitting the Custom Install Loudspeakers around template and mark 1 Draw centre lines if necessary 2 Cut around marked line CUSTOM INSTALLATION SERIES Tri -G = 5 rip Kg x 3 f/c m; 4.3 4 lb f/in ch ;0 .5 NM 247mm (9 3/4”) 247mm (9 3/4”) 156mm (6 1/8 ”) 121mm (4 3/4”) Template CT280-IDC, CT380-IDC, CT380-FX CT180, CT180-T2, CT280 3 Connect speaker cables by pushing down on the terminals and clamping the bare wire in the through hole.
PAGE 5
Speciﬁcations CT165 CT165-T2 CT180 CT180-T2 WT165 WT180 60Hz - 25kHz 60Hz - 25kHz 50Hz - 25kHz 50Hz - 25kHz 60Hz - 25kHz 50Hz - 25kHz Impedance 6 Ohms 6 + 6 Ohms 6 Ohms 6 Ohms 6 Ohms 6 Ohms Sensitivity (1W@1m) 88.5dB 88.5dB 90dB 90dB 88.5dB 90dB 107.4dBA 107.9dBA 111.6dBA 111.6dBA 107.4dBA 111.6dBA 65W 65W 120W 120W 65W 120W 20-65W 20-65W 30 - 120W 30 - 120W 20-65W 30-120W 1 x 6.5” MMP®II Cone Bass Driver 1 x 1” C-CAM® Pivoting, Gold Dome Tweeter 1 x 6.
PAGE 6
CT265 CT265-IDC CT265-FX CT280 CT280-IDC WT265 WT280 WT280-IDC Frequency Response 60Hz - 30kHz 60Hz - 30kHz 60Hz - 30kHz 50Hz - 30kHz 50Hz - 30kHz 55Hz - 30kHz 45Hz - 30kHz 45Hz - 30kHz Impedance 6 Ohms 6 Ohms 6 Ohms 6 Ohms 6 Ohms 6 Ohms 6 Ohms 6 Ohms Sensitivity (1W@1m) 88.5dB 88.5dB 88.5dB 90dB 90dB 88.5dB 90dB 90dB Maximum SPL 108dBA 108dBA 108dBA 111.6dBA 111.6dBA 107.4dBA 111.6dBA 111.
PAGE 7
Frequency Response Impedance Sensitivity (1W@1m) Maximum SPL Power Handling (RMS) Recommended Amp Requirements Drive Unit Complement CT380-IDC CT380-FX WT380-IDC 45Hz - 30kHz 45Hz - 30kHz 45Hz - 30kHz 6 Ohms 6 Ohms 6 Ohms 90dB 90dB 90dB 112dBA 111.6dBA 112dBA 150W 120W 150W 40 - 150W 30 - 120W 40-150W 1 x 8” C-CAM® Cone Bass Driver Featuring RST Pivoting Inverted Dual Concentric Module (IDC), Housing: 1 x 4” C-CAM® RST® Inverted Mid Range Driver.
PAGE 8
Monitor Audio Ltd. 24 Brook Road Rayleigh, Essex SS6 7XJ England Tel: +44 (0)1268 740580 Fax: +44 (0)1268 740589 Email: info@monitoraudio.co.uk Designed and Engineered in the United Kingdom © Monitor Audio.