Owner's Manual

Radius 270 Feet and Spikes
The Radius 270 is supplied pre-installed with rubber feet for use on hard floors, or when
spikes are inappropriate.
If using spikes, first remove the
rubber feet by simultaneously
twisting and pulling them out,
revealing the threaded inserts.
Take the spikes and twist
them in a clockwise direction
in to the plinths. Ensure they
are fully inserted, stand the
cabinet up and place it in it’s
final location. To level, adjust
the spikes accordingly,
before finally tightening the
knurled locking nut to hold
the spikes in that position.
Radius Series
6