Owner's Manual

monitoraudio.com 5
11. Mains Voltage Selector
This is factory set to your country’s mains voltage specification. Do not attempt to adjust this
as this may lead to permanent damage to the product and even the risk of fire. There is a clear
plastic cover over the selector to prevent accidental adjustment.
The LED on the top of the cabinet indicates whether the unit is in standby mode or operational. It
will be illuminated red when in standby, and green when operational.
Specification
ENGLISH
Radius 380 Radius 390
System Format
Active sub-woofer system – Auxiliary Bass Radiator (ABR)
loading. 18mm MDF cabinet (CARB2 approved)
Low Frequency Limit
30Hz (-6dB)
Upper Frequency Limit
Variable 40 – 120 Hz @ 24dB/Octave
Amplifier Power Output
140W @ < 1% THD+N 200 Watts @ 1% THD+N
Amplifier Classification
Class D amplifier with Switch mode power supply (SMPSU)
Bass EQ Switch
Music/ Movie/ Impact
Phase Control
0 & 180 degrees
Auto Sensing
Line Level >3.5mV
Input Level Requirements
Standby after approximately 15 minutes if no signal sensed
Driver Compliment
1 x 8” (200mm) C-CAM
®
long
throw driver. 1 x 8” (200mm)
Auxiliary bass radiator
1 x 10” (250mm) C-CAM
®
long
throw driver. 1 x 10” (250mm)
Auxiliary bass radiator
Input Impedance
> 20K Ohms
Mains Input Voltage
AC 110 - 120 V ~ 50/60Hz
AC 220 - 240 V ~ 50/60Hz
(Factory Region Preset)
Dimensions (H x W x D)
(Including amp & feet)
308 x 290 x 305mm
12
1/8
x 11
7/16
x 12 Inch
348 x 330 x 345mm
13
11/16
x 13 x 12
9/16
Inch
Connections
Stereo RCA in, LFE in, 12v Trigger in (3.5mm mono mini-jack)
12v Trigger Input
5 - 12v via 3.5mm mono mini-jack socket
Power Consumption
Standby: < 0.5W (ErP approved)
Typical Idle: < 10W
Max Rated: 200W
Weight (unpacked
10.16Kg (22lb 6oz) 13.76Kg (30lb 4oz)