Owner's Manual

Table Of Contents

Silver Series6

Wiring

Single Wiring

Single wiring is achieved via a single set of cables to the terminals on the back of the loudspeaker. Internally

the loudspeaker crossover guides the frequencies to the appropriate driver/tweeter. Low frequencies to the

bass drivers, mid frequencies to the mid/bass drivers and high frequencies to the tweeter.

It is perfectly acceptable to connect to the top, bottom terminals or even diagonally (experimentation is

advisable to achieve the preferred results).

NOTE: When using this method you must keep the terminal links in place.

Bi-Wiring

Bi-wiring is accomplished by connecting separate pairs of speaker cables to the terminals on the

loudspeaker from a single pair of connections on the ampliﬁer. In the case of the Silver Series, the bottom

terminals connect to the bass driver(s) and the top terminals connect to the tweeter in 2 way loudspeakers,

or the mid and tweeter in 2.5 and 3 way loudspeakers.

NOTE: When using this method the terminal links MUST be removed.

Bi-Amping

Bi-amping is the same as bi-wiring except you are introducing a second ampliﬁer into the equation.

In order to bi-amp you must connect a set of speaker cables to the top terminals on the loudspeaker from

one ampliﬁer and another set of speaker cables to the bottom terminals from the second ampliﬁer.

NOTE: When wiring this method the terminal links MUST be removed.