Owner`s manual

28
Design Guide - Flush Installation
3/4” RAISED DOOR PANEL ROUTING
For 3/4” raised door panel, routing is required. The router depth is 1/4” all the way around the panel back. Additional panel
width reductions are required per the diagrams below. This will create a “picture frame” routing that will slide onto the
attached door trim.
1/4”
11/32”
3/32”
3/4” PANEL SIDE VIEW
(AFTER ROUTING)
3/4” PANEL BOTTOM VIEW
(AFTER ROUTING)
Front
TOP DETAIL TOP
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
DETAIL BOTTOM
BOTTOM
HINGE
SIDE
HANDLE
SIDE
DETAIL HINGE
SIDE
DETA
IL HANDLE
SIDE
Back
Front
Back
Front
Back
11/32”
3/4”
1/4”
NOTE: Routed areas should be
finished as they may be visible
when assembled.
3/16”
2-1/16”
ROUTER DEPTH 1/4”