Specifications

Installation Instructions
ISTEP41CONNECT POWER
Connect power cord plug to a properly grounded
receptacle.
Check to make sure power is on by opening a drawer
to see if interior light turns on.
The interior fan runs all the time except when a
drawer is open.
See the Owner's Manual for further explanation of
the fan.
ISTEP61SET TEMPERATURE CONTROLS
The temperature controls are preset. Refer to
the Owner's Manual for more information. Allow
12-24 hours for the temperature to stabilize.
NOTE:The Double-Drawer Refrigerator operates very
quietly. You may not notice the unit running, and when
first installed, the fans and motor may not come on
immediately - this is normal. If the display is lit and
the light is working, the unit is operating.
ISTEP 5 ISLIDE PRODUCT INTO
THE CUTOUT
CAUTION: oo notpush againstthedrawer
panelswithyourknees.Do notpush or lifttheunitby
thedrawerhandles.Damage may occur!
ATTENTION : Ne poussezjamaisles
panneoux de tiroiravecvosgenoux.Ne poussez
jamais votre appareil ou ne le soulevezjamais par
les poign@esde tiroir. Vous pouvez I'endommager.
Open one of the drawers and gently push the unit
back into the opening with your hands against the
sides. Be careful not to entangle power cord.
Check again to be sure the unit is level. Adjust the
leveling legs until the unit is resting firmlg against
the bottom of the counter to prevent rocking or
movement during operation.
If alignment with adjacent cabinetry is an issue,
use a shim to secure the unit against the underside
of the countertop.
NOTE: While performing installations described in this book,
safety glasses or goggles should be worn.
For Monogram ® local service in your area, call
1.800.444.1845.
NOTE: Product improvement is a continuing endeavor
at General Electric. Therefore, materials, appearance
and specifications are subject to change without notice.
Pub. No. 31-51545-2
Part No. !97D5893P003
08-07 JR
Printed in 81ovenio
GE Consumer & Industrial
Appliances
General Electric Company
Louisville, KY 40225
ge.com