Installation Instructions
26
31-1000600 Rev. 1
Ŷ Locate blue arrow on
¿OWHU5RWDWH¿OWHUWR
align arrow as shown.
Ŷ,QVHUW¿OWHULQWRSRVLWLRQ
DQGURWDWHóWXUQ
FORFNZLVHXVH¿OWHU
removal tool if needed).
Ŷ5HWXUQ¿OWHUUHPRYDOWRROWR
mounting hook.
Ŷ
Close the compartment door.
Ŷ Verify the two 1/4” hex head
screws are assembled to handle
side of the products for both
freezer and fresh food columns.
Ŷ Put the access cover back onto the unit and secure
with two 1/4” hex head screws.
Installation Instructions - Dual Integrated Installation
1/4” Hex Screws
STEP 9 FINAL EXTERNAL UNIT
PREPARATION (Cont.)
1/4” Hex Screws
1/4” Hex
Screws
Access
Cover
STEP 9
FINAL EXTERNAL UNIT
PREPARATION
FOR FLUSH INSTALLATION: Make sure front surface
of the door is 7/8” behind front face of surrounding
cabinets BEFORE securing brackets to the surrounding
cabinetry.
Ŷ Open the doors to
the units. Locate
¿OWHUDQG¿OWHU
removal tool. Filter
should be as shown.
Ŷ5RWDWH¿OWHUóWXUQ
counterclockwise
XVH¿OWHUUHPRYDO
tool if needed).
Ŷ3XOO¿OWHUWRZDUG\RXWR
remove. NOTE: Water
system will not function
ZLWKRXW¿OWHULQSODFH
Ŷ Make sure lights are on inside the unit. If they are not
on, check to make sure the master switch is on by
removing the front enclosure which is secured with
six 1/4” Hex screws.
Ŷ Switch on the master switch if not on. (Master Switch
Wires hidden for clarity.
Ŷ Assemble the enclosure with removed screws.
Ŷ Predrill 1/16” holes is both the sides of the surround
1/2” deep through holes in the enclosure.
Ŷ Secure unit by driving four 1/4” hex screws to both
sides to surrounding cabinetry. NOTE: This step
does NOT replace the anti-tip safety hardware. Refer
to Step 4 Installing Anti-Tip Bracket and Step 7
Inserting/Securing into Cabinet Surround for details
on installing the anti-tip hardware. Repeat for the
second unit.
Filter Removal Tool
Filter
Mounting
Hook
Master Switch
1/4” Hex Screws
Compartment Door