Owner's Manual
26
Design Guide - Flush Installation
1/2” (1.27 cm) OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be installed on
trimmed models. The overlay panel must be secured to a 1/4”
(.63 cm) thick backer panel which slides into the trim. A spacer panel
0.10” (0.25 cm) thick must be placed between the overlay and backer
panel.
Assemble the panels with glue and screws:
• Center the spacer panel on the backer panel, left to right and top to
bottom. Secure the panels with glue.
• Refer to the following chart for locating the backer panel to the over-
lay panel. Secure the overlay panel to the backer panel with glue
and screws. Screws must be countersunk into the backer panel.
Fresh Food Door Grille
1/4” (0.63 cm)
Backer Panel
69-5/16” x 33-7/8”
(176.05 cm x 86.04 cm)
8-7/8” x 33-7/8”
(22.54 cm x 86.04 cm)
.10” (0.25 cm)
Spacer Panel
67-15/16” x 32-1/2”
(172.56 cm x 82.55 cm)
7-5/8” x 32-1/2”
(16.37 cm x 82.55 cm)
1/2” (1.27 cm)
Overlay Panel
69-3/4” x 38”
(177.16 cm x 96.52 cm)
10-7/16” x 38”
(26.51 cm x 96.52 cm)
IMPORTANT NOTE: Maximum total weight for the
assembled panels:
• Fresh food door panel – 75 lbs. (34.02 cm)
• Grille Panel – 18 lbs. (8.16 cm)
.250” + .10” + .50” = .850” Total Panel Thickness
(0.635 cm + 0.254 cm + 1.27 cm = 2.159)
1/2"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
C
D
A B
Grille Back
ABCD
Door Panel 2-1/16”
(5.24 cm)
2-1/16”
(5.24 cm)
3/16”
(0.47 cm)
1/4”
(0.63 cm)
Grille Panel 2-1/16”
(5.24 cm)
2-1/16”
(5.24 cm)
1-7/16”
(3.65 cm)
1/8”
(0.31 cm)
Panel Dimensions
Hinge Side
Fresh Food Back
Backer with
Overlay Panel
Assembly
A
B
C
D
Door Back