Owner's Manual

28
Design Guide - Flush Installation
3/4” (1.9 cm) RAISED DOOR PANEL ROUTING
For 3/4” (1.9 cm) raised door panel, routing is required. The router depth is 1/4” (0.63 cm) all the way around the
panel back. Additional panel width reductions are required per the diagrams below. This will create a “picture frame”
routing that will slide onto the attached door trim.
1/4”
11/32”
1/4”
3/4” PANEL SIDE VIEW
(AFTER ROUTING)
Front
TOP DETAIL TOP
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
DETAIL BOTTOM
BOTTOM
Back
Front
Back
7/16”
3/4”
1/4”
NOTE: Routed areas should be
finished as they may be visible
when assembled.
3/4” PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
2-1/16” 2-1/16”
ROUTER DEPTH 1/4” ROUTER DEPTH 1/4”
NOTE: For panels constructed with rails and stiles (5-panel), the minimum width is 3” (7.62 cm) for rails and 4” (10.16 cm)
for stiles.