Installation

25
Design Guide - Flush Installation
1/2” OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be
installed on trimmed models. The overlay panel must be
secured to a 1/4” thick backer panel which slides into the
trim. A spacer panel 0.10” thick must be placed between the
overlay and backer panel.
Assemble the panels with glue and screws:
• Center the spacer panel on the backer panel, left to right
and top to bottom. Secure the panels with glue.
• Refer to the following chart for locating the backer panel to
the overlay panel. Secure the overlay panel to the backer
panel with glue and screws. Screws must be countersunk
into the backer panel.
Fresh Food Door Grille
1/4” Backer Panel 69-5/16” x 33-7/8” 8-7/8” x 33-7/8”
.10” Spacer Panel 67-15/16” x 32-1/2” 7-5/8” x 32-1/2”
1/2” Overlay Panel 69-3/4” x 38” 10-7/16” x 38”
IMPORTANT NOTE: Maximum total weight for the
assembled panels:
• Fresh food door panel – 75 lbs. • Grille Panel – 18 lbs.
.250” + .10” + .50” = .850” Total Panel Thickness
1/2"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
C
D
A B
Grille Back
ABCD
Door Panel 2-1/16” 2-1/16” 3-16” 1/4”
Grille Panel 2-1/16” 2-1/16” 1-7/16” 1/8”
Panel Dimensions
Hinge Side
Fresh Food Back
Backer with
Overlay Panel
Assembly
A
B
C
D
Door Back