Installation Instructions

Design Guide - Flush Installation

1/2” OVERLAY PANEL DIMENSIONS

For a more custom appearance, overlay panels may be

installed on trimmed models. The overlay panel must be

secured to a 1/4” thick backer panel which slides into the

trim. A spacer panel 0.10” thick must be placed between

the overlay and backer panel.

Assemble the panels with glue and screws:

• Center the spacer panel on the backer panel, left to right

and top to bottom. Secure the panels with glue.

• Refer to the following chart for locating the backer panel

to the overlay panel. Secure the overlay panel to the

backer panel with glue and screws. Screws must be

countersunk into the backer panel.

Fresh Food Door Grille

1/4” Backer Panel 69-5/16” x 33-7/8” 8-7/8” x 33-7/8”

.10” Spacer Panel 67-15/16” x 32-1/2” 7-5/8” x 32-1/2”

1/2” Overlay Panel 69-3/4” x 38” 10-7/16” x 38”

IMPORTANT NOTE: Maximum total weight for the

assembled panels:

• Fresh food door panel – 75 lbs. • Grille Panel – 18 lbs.

.250” + .10” + .50” = .850” Total Panel Thickness

1/2"

Overlay

Panel

1/4"

Backer

Panel

Door

.10"

Spacer

A B

Grille Back

AB CD

Door Panel 2-1/16” 2-1/16” 3-16” 1/4”

Grille Panel 2-1/16” 2-1/16” 1-7/16” 1/8”

Panel Dimensions

Hinge Side

Fresh Food Back

Backer with

Overlay Panel

Assembly

Door Back