Owner's Manual

11
Design Guide - Standard Installation
1/4"
1/2"
3/4"
1"
1-1/4"
1"
3/4" Overlay
Panel
(Nominal Size)
Stainless Steel
1/4"
1/2"
3/4"
2"
1-1/4"
1-1/2"
1-3/4"
3"
2-1/4"
2-1/2"
2-3/4"
1/4"
1/2"
3/4"
Door
23-7/8" From
Rear of
Refrigerator
1"
Refrigerator
Case
Trim
Top View
130° DOOR SWING
Scale 1:1
IMPORTANT NOTE –
FOR DISPENSER MODELS:
Dispenser models are supplied with two
dispenser trims, one to fit framed panels
and one for overlay panels. Dispenser
trim fit to the custom panel depends on
correct panel thickness. Framed panels
must be 1/4” (0.63 cm) nominal. Overlay
panels should be constructed as shown
to accomplish a total 1.100” (2.79 cm)
thickness. See page 13 for details.
Frameless Cabinets: The case trim
overlaps cabinets at the top and sides.
Therefore, frameless cabinets may require
filler strips to prevent interfeence with
cabinet door swing. The opening must
allow for filler strips.
31-49171 Rev. 2