Owner's Manual
DISPENSER TRIM FIT EXAMPLES:
(NOT TO SCALE)
1/4” (0.63 cm) FRAMED
PANEL
• The dispenser trim fits over the custom
panel and snaps into the freezer door.
• The clips will not engage the door if the
panel is more than 0.250”
(0.63 cm) thick.
• If the panel is less than 0.250”
(0.63 cm) thick, a noticeable gap may
be created around the dispenser trim.
3/4” (1.91 cm) OVERLAY
PANEL
• The dispenser trim fits over the custom
panel and snaps into the freezer door.
• The clips will not engage the door if the
panel is more than 1.100” (2.79 cm)
thick.
• If the panel is less than 1.100” (2.79
cm) thick, a noticeable gap may be
created around the dispenser trim.
13
Design Guide - Standard Installation
1/4” Dispenser Trim
3/4” Overlay Dispenser Trim
31-49171 Rev. 2