Owner's Manual

Installation Instructions - Standard Installation

INSPECT FINAL INSTALLATION

Check door alignment. Stand back away from the

refrigerator to inspect the final installation.

• Check to be sure the handles are evenly aligned with

each other at the top. To adjust, loosen the handle

screws and slide up or down. Tighten the screws.

• Shipping or the addition of heavy door panels may

have caused the doors to move slightly out of

alignment.

• If necessary, the fresh food door may be adjusted up

or down to align with the freezer door.

• Use a 5/16” wrench to adjust the hinge pin as shown.

Bushing

Door Hinge

Case Hinge

5/16" Wrench

Raise

Door Out of

Alignment

STEP 15 INSTALL TOEKICKS

• Locate the supplied toekicks (shipped taped to the

side of the refrigerator.

• The narrower set of toe kicks will be used with

standard installation. You can discard the other set of

toe kicks.

• Attach the LARGER toekick to the refrigerator using

ONLY the top center hole (1).

• Attach the toekick skirt to the refrigerator using the

three lower slots (2).

• A custom toekick can be installed to match or

complement the surrounding cabinetry. Use the

supplied toekick as a template to cut the shape.

31-49171 Rev. 2