Owner's Manual

CUSTOMIZATION BASICS:
Professional Style Stainless Steel Refrigerators
Stainless steel wrapped refrigerators have beveled
edges and professional-style handles. These models
are shipped ready for installation.
Stainless Steel Wrapped Refrigerators
Stainless Steel wrapped refrigerators have wrapped
doors and grille panel, beveled edges, and tubular
stainless steel handles that coordinate with other
Monogram appliances. These models are shipped
ready for installation.
44
Design Guide - Stainless Steel Installation
REFRIGERATOR LOCATION
• Do not install the refrigerator where the temperature
will go below 55°F (13°C). It will not run often
enough to maintain proper temperatures.
• Do not install the refrigerator where temperatures will
go above 100°F (37°C). It will not perform properly.
• Do not install the refrigerator in a location exposed to
water (rain, etc.) or direct sunlight.
• Install it on a floor strong enough to support it fully
loaded.
SIDE PANELS
Side panels must be used
whenever the sides of the
refrigerator will be exposed.
The 1/4” (0.63 cm) side panels
will slip into the side case
trim. Secure the panels to
the refrigerator with stick-on
hook and loop fastener strips.
Order the side panels from the
cabinet manufacturer.
• Cut a notch in the top front
corner as shown to allow
clearance for corner keys in
the front side trim.
* Depending on installation height.
*84"
2-9/16"
24"
*3" to 4"
3/16"
1-7/8"
31-49171 Rev. 2