Specifications

10
1/4"
1/2"
3/4"
1"
1-1/4"
1"
3/4" Overlay
Panel
(Nominal Size)
Stainless Ste
e
l
1/4"
1/2"
3/4"
2"
1-1/4"
1-1/2"
1-3/4"
3"
2-1/4"
2-1/2"
2-3/4"
1/4"
1/2"
3/4"
Door
23-7/8" From
Rear of
Refrigerator
1"
Refrigerator
Case
Trim
Top view
130° door swing
(Factory setting)
Scale 1:1
IMPORTANT NOTE – FOR DISPENSER MODELS
Dispenser models are supplied with two dispenser
trims, one to fit framed panels and one for overlay
panels. Dispenser trim fit to the custom panel depends
on correct panel thickness. Framed panels must be 1/4"
nominal. Overlay panels should be constructed as shown
to accomplish a total 1.100" thickness.
Frameless cabinets: The case trim overlaps cabinets at the
top and sides. Therefore, frameless cabinets may require filler
strips to prevent interference with cabinet door swing. The
opening must allow for filler strips.
Use this page to determine door
swing interaction with adjacent
cabinets or countertops.
Advance planning for built-in custom side-by-side refrigerators