Specifications

102
Dual-burner
outdoor cooktop
ZX2NYSS (natural gas)
ZX2LYSS (liquid propane)
Overall dimensions
(WxHxD in inches):
13 x 10-1/2 x 25-3/4
Approx. shipping wt. (lbs.) 56
• For built-in installations
• Natural or LP gas must be
specified by model number
• Trim kit required for enclosure
• Insulated jacket required for
combustible enclosure
General features
Porcelain-coated cast-iron burners. The spark-ignition burners
are 15,000-BTU-rated and come with a removable stainless steel
cover that doubles as a work surface. Burners are baffled to reflect
heat into the cooking area.
Precision brass valves. Controls are mounted on durable brass
valves that resist rust and corrosion, ensuring long life in an
outdoor environment.
Drip pan. The full-width stainless steel pan slides out easily for
removal and cleaning.
Versatile installation. The dual-burner cooktops are designed to
be built in. The cooktop provides additional outdoor cooking area
and complements the built-in 36” outdoor cooking center.
For additional details on product installation, warranty coverage,
care and maintenance, visit monogram.com.
Dual-burner outdoor cooktop
Advance planning for dual-burner outdoor cooktop
Dual-burner outdoor cooktops are factory set for natural or
liquid propane gas. The correct model should be ordered for the
installation situation.
These cooktop burners are designed for outdoor use only.
• The burner is designed to be built into an enclosure.
Product dimensions
Clearances
• When installed in an enclosure, allow 6" clearance at the rear
and both sides to vertical combustible materials.
• When installed into a combustible enclosure, the cooking
surface should be 1" above adjacent horizontal surfaces and
35-1/2" above the floor.
ZX2NYSS
Natural gas
ZX2LYSS
LP gas
605Dia206
23-3/4"
25-3/4"
2"
13"
10-1/2"
Installation in a non-combustible
(masonry) enclosure
The burner drops into the
opening. The burner must
be supported by a solid deck.
Installation in a combustible enclosure
ZX2JYSS insulated jacket is required
The insulated jacket must be
supported from the bottom by
a solid deck or ledge on each
side beneath the jacket.
Construct the enclosure as
shown and place the insulated
jacket into the enclosure.
Accessories
ZX2TKYSS trim kit
For combustible and non-combustible enclosures. The trim
will conceal the gap at the rear and sides of the opening. The
cooktop should be installed at least 35-1/2" above the floor.
605Dia209
24-5/8"
11"
2x2
Opening
for Gas
Supply
Line
1-1/8"
1"
15-3/8"
605Dia208
23-5/8"
10-3/8"
13-1/8"
2x2
Opening
for Gas
Supply
Line
ZX2NYSS
IGNITOR
REAR FRONT