Specifications

16
Advance planning for built-in bottom-freezer refrigerators
These bottom-freezer refrigerators are factory set for a left or right door swing.
The door swing is NOT reversible. Choose an RH model with hinge on the right
side; the door swings left to right. Choose an LH model with hinge on the left
side; the door will swing right to left.
729Dia65
Standard Door Handle
Framed Panel
Standard
Door Handle
3/4" Overlay Panel
1/4" Thick Backer Panel
.10" Thick Spacer Panel
696Dia9
Customization basics: framed or overlay panels, custom handles
and accessory kits
Professional refrigerators
ZICP360SLSS, ZICP360SRSS
Stainless steel wrapped refrigerators with professional handles,
louvered grille panel and chamfered door edges. These models
are shipped ready for installation.
Stainless steel refrigerators
ZICS360NRLH, ZICS360NRRH
Stainless steel refrigerators have wrapped doors and grille panel,
beveled edges and tubular stainless steel handles. These models
are shipped ready for installation.
Custom refrigerators
ZIC360NRLH, ZIC360NRRH
Custom refrigerators are designed to be customized with
decorative panels. Field-installed custom door and grille
panels are required.
Framed panels
You may install 1/4"-thick custom panels from your cabinet
manufacturer. The decorative panel or accessory panel slides
into the factory-installed trim.
Standard supplied handles shown in 1/4" panel position.
Standard supplied handles shown in 3/4" overlay
panel position.
Overlay panels
You may also choose to install custom overlay panels
from your cabinet manufacturer. This design provides a
seamless appearance which integrates smoothly with
surrounding cabinetry.
Door handles
The supplied handles can be adjusted to accommodate both
framed or overlay panels. Custom handles of your choice,
supplied by your cabinetmaker, can also be installed. If desired,
you may order ZKHCSS2 Monogram
®
stainless steel tubular
handle kit for overlay panels.
Side panels
Side panels must be used whenever the sides of the
refrigerator will be exposed.
Optional accessory kits
ZKHCSS2: Monogram stainless steel tubular handle kit
and handle side trim for custom handles. For use on
3/4" custom panels.
ZKHCT: Handle side trim kit for left-hand and right-hand doors.
For use on 3/4" custom panel when using a custom handle.
ZUG2: For side-by-side installation of two trimmed bottom-
freezer refrigerators. This kit provides for the installation of a
unified custom grille panel to span the width of two units using
a framed or overlay panel.
ZUGSS2: For side-by-side installation of two stainless
steel–wrapped bottom-freezer refrigerators. This kit
provides a unified stainless steel grille panel to span the
width of two units.
Accessory panels
Black acrylic and stainless steel accessory panels are available
from your Monogram supplier. Panels are cut to size and ready
to install. These panel kits must be ordered separately.
Black Stainless steel
ZPBC360 ZPSC360
605Dia2
6
Right-hand
door swing
Left-hand
door swing