Specifications

22
Advance planning for built-in custom all-refrigerators and all-freezers
Customization basics: Framed or overlay panels, custom handles and accessory kits
These Monogram
®
all-refrigerators and all-freezers may be
installed flush or semi-flush with surrounding cabinetry. Cutout
dimensions, clearances and side panel sizes are determined
by the many installation options available.
The all-refrigerator and all-freezer models are factory set for a
left or right door swing. The door swing is NOT reversible. Choose
an RH model with hinge on the right side; the door swings left to
right. Choose an LH model with hinge on the left side; the door
will swing right to left.
Stainless steel–wrapped all-refrigerators
ZIRS36NMLH, ZIRS36NMRH
Stainless steel–wrapped all-freezers
ZIFS36NMLH, ZIFS36NMRH
Stainless steel–wrapped models have tubular stainless steel
handles that coordinate with other Monogram appliances.
These models do not accept custom panels or custom
handles. However, you may wish to change the installation
height or use a side-by-side kit.
Custom all-refrigerators
ZIR36NMLH, ZIR36NMRH
Custom all-freezers
ZIF36NMLH, ZIF36NMRH
Custom all-refrigerators are designed to be customized with
decorative panels. Field-installed custom door and grille
panels are required. Use one or more kits to accomplish a
wide range of appearance options. Trim kits must be ordered
separately from your Monogram supplier. See trim kit
descriptions at right.
Framed panels
You may install a 1/4"-thick custom panel from your cabinet
manufacturer. The decorative panel slides into the factory-
installed trim. Black Lexan
®
and stainless steel accessory
panels are available from your Monogram dealer.
3/4" trimless panels
You may also choose to install a 3/4" custom overlay panel
from your cabinet manufacturer. This design provides a
seamless appearance which integrates smoothly with
surrounding cabinetry. A trim kit is required for a 3/4"
custom panel.
Door handles
The supplied handle can be replaced with a custom handle
of your choice on both 1/4" and 3/4" panels. The Monogram
tubular stainless steel handle is also available to fit the
chosen panel thickness. Custom handles should be supplied
by your cabinetmaker. Trim kits are required to support a
custom handle.
Optional trim kits
Door handle kits
ZKHR1: Provides the necessary framework to install a custom
handle of your choice onto a 1/4"-thick custom panel. (Handle
not included.)
ZKHTR1: Provides the necessary framework to install a custom
handle of your choice onto a 3/4"-thick custom panel. (Handle
not included.) This kit must be used in combination with
ZKTR36LH or ZKTR36RH.
ZKHRSS1: Tubular stainless steel handle for 1/4"-thick
panel installation.
ZKHTRSS1: Tubular stainless steel handle for 3/4"-thick panel
installation. This kit must be used in combination with ZKTR36LH
or ZKTR36RH.
Custom panel kits
ZKTR36LH for ZIR36NDLH, ZIF36NDLH
ZKTR36RH for ZIR36NDRH, ZIF36NDRH
Provides for the installation of 3/4" thick custom door and
grille panels. Use this kit for a trimless appearance. This kit
includes a standard handle to fit the 3/4" thick panel.
Height adjustment kit
ZGC2: Provides 1/4" grille panel frame side pieces for 83-1/2"
and 84-1/2" installation heights. (The supplied grille panel
frame is set for 84" installation height.)
Side-by-side kit
ZUG75: For side-by-side installation of two trimmed units.
This kit provides for the installation of a 3/4" unified custom
grille panel to span the width of two units. Includes a trim strip
to cover inside case trim for a finished appearance. This kit
must be used in combination with BOTH the ZKTR36LH and
ZKTR36RH custom panel kits.
ZUGSS side-by-side grille panel kit
For installation of two stainless steel units. This kit provides
a unified stainless steel grille panel to span the width of two
units. It includes a trim strip to cover the inside case trims for
a finished appearance.
Accessory panels
Black Lexan and stainless steel accessory panels are available
from your Monogram supplier. Panels are cut to size and ready to
install. These panel kits must be ordered separately.
Black Stainless steel
ZWBR36 ZWSR36