Specifications

36
Automatic icemaker
Automatic icemaker
ZDIS150WSS, ZDIC150WBB, ZDIC150WWW
Overall dimensions
(WxHxD in inches):
14-13/16 x 34-1/2 x 23-5/16
Amps @ 115 Volts 5.3
Approx. shipping wt. (lbs.) 110
General features
High production, large capacity. The icemaker produces up to
50 pounds of clear ice per day and automatically shuts off when
the 25-pound-capacity bin is full.
Customization. The 15" icemaker door accepts a 3/4" custom
panel to match surrounding cabinetry. You can also add your
own custom handle.
For additional details on product installation, warranty
coverage, care and maintenance, visit monogram.com.
Advance planning for automatic icemaker
The installation space
The Monogram
®
icemaker may be installed
free-standing or below a countertop.
Note: The installation of a 3/4"-thick custom panel will require
an additional 1-1/2"-wide filler strip on the hinge side. The
filler strip will act as a spacer between the icemaker case and
adjacent cabinet. The filler strip will prevent interference with
the icemaker door swing when it is installed between frameless
or framed cabinetry. The width of the opening must include the
filler strip.
The icemaker may be closed in on the top and sides as long as
the front is unobstructed for air circulation and proper access to
the door.
• Do not install these products where the temperatures will go
below 55° (13°C) or above 110° (32°C).
Electrical
A 115V, 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall as shown.
Water line
The water line can enter the opening through the back wall
as shown. Route GE SmartConnect
™
kit or 1/4" O.D. copper
tubing between the cold water line and the water connection
location at the rear of the icemaker. The installation of an easily
accessible shut-off valve in the water line is required.
The serial plate is located
on the left wall of the ice
storage bin.
• Built-in or free-standing installation
• Accepts 3/4" custom panels, requires kit
• Reversible door swing, no kit required
• Leveling system
*15"
34" min.
Adjustable
to 34-1/2"
34" to
34-1/2"
11-1/2"
9"
Water and Electrical
Supply Should Enter
From Back Wall In
Shaded Area.
* 16-1/2" with a 3/4"
thick custom panel
3"
24"
Min.
28-1/2"
The installation of a 3/4” thick
custom panel will require an
additional 1-1/2” wide filler
strip on the hinge side.
14-13/16"
23-5/16" to
Door Front
Note: The addition of
a 3/4"-thick custom
panel will result in a
front-to-back depth
of 24-1/16". The
icemaker cannot
be installed flush to
adjacent 24" deep
cabinets with a 3/4"-
thick custom panel.
ZDIS150WSS