Specifications

50
Clearances between
cooktop and side wall
or combustible material
must be at least 12 " on
each side.
8"
2-1/2"
7/8"
46-1/8"
22-3/4"
8-7/16"
26-5/8"
4
7-
7
/8
"
22
"
1
2"
1/2"
A
va
i
l
ab
l
e
Ba
c
ksplas
h
Install a
matching trim
strip to cover
the cut edge
below the
cooktop.
Allow Additional
Clearance Below
the Cooktop Burner
Box for the Regulator
and Gas Connections
Advance planning for 48" professional gas cooktops
Product dimensions and clearances
A 54"- or 48"-wide professional vent hood with a minimum
1200 CFM is recommended for installation over this cooktop.
Backsplash accessories
The cooktop requires a 12" minimum clearance to a vertical
combustible surface at the rear. A backsplash is required
for installations with less than 12" clearance. The following
backsplash accessories are available, or a custom,
non-combustible backsplash can be used.
ZX12B48HSS, 12" backsplash
ZX22B48HSS, 22" backsplash with warming shelf
Backsplash with warming shelf
All Monogram professional wall mount hoods feature
infrared warming lights. The 22"-high backsplash accessory
with warming shelf is a perfect complement when installed
with the tapered or straight-sided hoods. Restaurant-style
professional hoods are shipped with a stainless steel
backsplash and warming shelf.
Side view with a backsplash
Clearances between cooktop and
side wall or combustible material
must be at least 12" on each side.
After the cooktop is installed, the
bottom front edge of the cutout
may need to be covered. Install a
trip strip to match cabinetry along
the bottom of the cooktop.
48" cooktop surface configurations
The 48" Monogram
®
professional cooktops are available with
a combination of grill, griddle or burners to suit your needs.
ZGU48N4GHSS
with 4 burners,
grill and griddle
(Order ZGU48L4GHSS
for LP gas)
ZGU48N6RHSS
with 6 burners and grill
(Order ZGU48L6RHSS
for LP gas)
ZGU48N6DHSS
with 6 burners and griddle
(Order ZGU48L6DHSS
for LP gas)
Installation options
• The cooktop stainless steel surface will be 1/2" higher than
adjacent countertops.
• In 24"-deep cabinets, the front of the cooktop will be
approximately 1-7/8" beyond the front of the countertop.
36" Min.
to
Combustibles
12" Min. to
Combustibles
or 0" Min. to
Combustibles
with 12" or 22"
Backsplash
605Dia81
Front Flush With
Cabinets - a Minimum
of 25-3/4" Cabinet
Depth Required
Flush With
Cabinet Front
Cooktop
605Dia8
0
Front Projects
Outward as Shown
From Standard
Depth Cabinets
Cooktop
The serial plate is located
beneath the ledge trim, just
above the left knob.
NOTE: These cooktops require 8" free-space below the burner
box. Allow additional clearance below the burner box for the
regulator and gas connections. Use a 90° elbow to route the
gas connections and limit interference with drawers or other
cabinetry features.