Specifications

52
Clearances between
cooktop and side wall
or combustible material
must be at least 12 " on
each side.
8"
2-1/2"
1/2"
35"
22-3/4"
26-5/8"
8
-7/16"
3
5
-
7/
8
"
2
2
"
12
"
A
v
ai
l
ab
l
e
B
ac
k
sp
la
s
h
Install a
matching trim
strip to cover
the cut edge
below the
cooktop.
1/2"
Allow Additional
Clearance Below
the Cooktop Burner
Box for the Regulator
and Gas Connections
36" cooktop surface configurations
The 36" Monogram
®
professional cooktops are available
with a combination of a grill or griddle and 4 burners, or
simply 6 burners.
ZGU36N4DHSS
with 4 burners and griddle
(Order ZGU36L4DHSS for LP gas)
ZGU36N4RHSS
with 4 burners and grill
(Order ZGU36L4RHSS for LP gas)
ZGU36N6HSS
with 6 burners
(Order ZGU36L6HSS for LP gas)
Product dimensions and clearances
A 36"- or 42"-wide professional vent hood with a minimum
600 CFM is recommended for installation over this cooktop.
Backsplash accessories
The cooktop requires a 12" minimum clearance to a vertical
combustible surface at the rear. A backsplash is required
for installations with less than 12" clearance. The following
backsplash accessories are available, or a custom,
non-combustible backsplash can be used.
ZX12B36HSS, 12" backsplash
ZX22B36HSS, 22" backsplash with warming shelf
Backsplash with warming shelf
All Monogram professional wall mount hoods feature
infrared warming lights. The 22"-high backsplash accessory
with warming shelf is a perfect complement when installed
with the tapered or straight-sided hoods. Restaurant-style
professional hoods are shipped with a stainless steel
backsplash and warming shelf.
Side view with a backsplash
Installation options
• The cooktop stainless steel surface will be 1/2" higher than
adjacent countertops.
• In 24"-deep cabinets, the front of the cooktop will be
approximately 1-7/8" beyond the front of the countertop.
605Dia81
Front Flush With
Cabinets - a Minimum
of 25-3/4" Cabinet
Depth Required
Flush With
Cabinet Front
Cooktop
605Dia8
0
Front Projects
Outward as Shown
From Standard
Depth Cabinets
Cooktop
Advance planning for 36" professional gas cooktops
The serial plate is located beneath the ledge trim, just
above the left knob.
Note: These cooktops require 8" free-space below the burner
box. Allow additional clearance below the burner box for the
regulator and gas connections. Use a 90° elbow to route the
gas connections and limit interference with drawers or other
cabinetry features.
36" Min.
to
Combustibles
12" Min. to
Combustibles
or 0" Min. to
Combustibles
with 12" or 22"
Backsplash
Clearances between cooktop and side
wall or combustible material must be at
least 12" on each side. After the cooktop
is installed, the bottom front edge of the
cutout may need to be covered. Install
a trip strip to match cabinetry along the
bottom of the cooktop.